Tag Archive welding supplies

Welder in Karnataka, dies of cancer

October 12, 2021 Comments Off on Welder in Karnataka, dies of cancer By admin

The welding supplies company has announced that the death of a co-founder has resulted in the loss of another member of the team.

Sources in the company told The Times of India that the news of the loss was announced by CEO Rahul Mehta and senior management, after the co-founders passed away last month.

Sources said that Mehtabhai and Ankit are not in the country anymore and the company has been unable to locate their bodies.

The company is yet to make any announcement about their future whereabouts.

Earlier this month, a video clip surfaced showing the pair welding with a coiled steel rod, which was apparently being heated by a water pump.

According to a tweet from the company, the cofounders’ deaths have been the result of natural causes.

The video was taken on January 18, the day before they were set to go on a two-week trip to Sri Lanka.

, ,

How to save on your next clean and disinfection bill

September 3, 2021 Comments Off on How to save on your next clean and disinfection bill By admin

How much will you pay for a home cleaning supplies company?

A new survey shows a growing number of Americans are finding that the best way to save money is to shop around.

The survey by the Pew Research Center asked 2,068 adults to rank the cost of a home-cleaning supply, and found that more than a quarter of Americans believe the best savings come from local vendors.

In other words, the survey found that nearly half of Americans think that the cheapest way to clean and sanitize a home is through an online shopping trip.

While that may seem like a lot of money, according to Pew, that is only one of many factors that go into the cost.

“People don’t realize that a lot can go into what you pay, how much it costs, what services you get,” says Amy Hagen, senior vice president of the Pew Center’s American Trends Panel.

“So the question is, ‘What do you want?’ and ‘What’s the best deal for you?'”

Hagen says that, if you are shopping online, it is important to compare prices between suppliers and products.

“That’s where a good comparison shop is a good place to find a cheaper product,” she says.

Another popular method is to compare pricing across multiple products to see if you can find the right price for each.

“There are companies that have done it for years, and I think there’s probably a good amount of value in that,” says Hagen.

But there are many other factors that can add up to an extra cost.

The Pew survey also asked participants to rate their household’s health, and they found that the top reason respondents gave for missing out on a home clean and a home disinfection was cost.

The Pew survey found more than 70% of Americans said that they are not getting the best value for their home cleaning and disinfecting supplies because of their cost, while 27% said that their household has a higher cost than they are getting.

“We’re talking about more than $1,500 a year,” Hagen says.

“The fact is, we’re not paying for these services ourselves,” says Jennifer Mihalik, senior director of consumer insights for home cleaning.

“They’re being provided by other people.

We’re not actually getting any benefit.”

Hagen adds that the Pew survey did not measure the average cost of cleaning and sanitizing a home.

“If we did that, we would have found that people would say, ‘Well, we could get it for less if they could give us a little more,'” she says, “but we don’t do that.

So it’s not clear to us that the average person would get a lot more value from it.”

The report also found that consumers were not getting more value for cleaning and a disinfection by the company they purchased the home from.

While 70% said they would recommend a home cleanser and 70% would recommend disinfection, the study found that only 28% of people said that the company was giving them the best price.

While there are several reasons consumers might not recommend a cleaning company, Hagen suggests one major factor is the difficulty in finding the right product online.

“The online market is really not that great, and people don’t have a lot to go on,” she adds.

“There are some things that we can do, and that includes looking for the lowest price, but there are so many other things that people have to do to make sure they’re getting the most value out of their home,” Hagan says.

“I think the best thing is to just keep your eye out for what’s available and see what’s the most efficient way to get what you’re paying for.”

, , ,

What’s going on in the world of welding?

July 7, 2021 Comments Off on What’s going on in the world of welding? By admin

The welding industry has experienced a sharp rise in the past two years, as demand for quality equipment has increased, and demand for welders has fallen.

It’s an unusual story, with two major trends happening in tandem.

First, demand for welding equipment is increasing.

But there’s a problem: it’s not cheap.

Welding is a relatively new, high-volume manufacturing activity.

So it’s hard to predict how the industry will evolve in the future, especially when new technologies are entering the market.

And there are challenges with the welding process, like heat-treatment and welding-grade steel.

That’s where things get tricky.

So, we’re going to focus on a few questions to help you get a better understanding of how welding will evolve over the next couple of decades.


Will welding be a low-cost, high volume activity?

As more companies embrace new welding processes, the welders of tomorrow will need a wide range of welding equipment to meet the demand.

So what types of equipment will they need?

Some of the most popular welding equipment in use today are steel tubing, cast-in-place welders, and welders’ tools.

Other types of welding machines, like gas-jet, electric-power, and air-powered machines, are available for a very limited price.

There’s a growing demand for high-quality welders tools for welding.

But how do you get them?

Most welding equipment can be purchased at the welding supply chain, which is a chain of retailers that assembles, assembles and sells welders supplies.

The welders supply chain includes suppliers like auto parts manufacturers, welding shops, welding suppliers, and more.

It can also include dealers and others who have a direct relationship with welding manufacturers.

A company that sells welding supplies to the welding industry needs to meet certain criteria.

The company must meet certain benchmarks to become a supplier of welders products.

Those benchmarks are: • the company must be owned by a welding company, such as a manufacturer, an affiliate, a welding supply house, or an affiliate of a welding supplier, or the company is owned by at least one such company; • the supplier must have been licensed in the United States since the company’s inception; • there must be no more than 5,000 welders in the country and no more then 500 welders welders are working in the same welding plant at any given time; and • the supply chain must meet minimum regulatory requirements.

These requirements aren’t always easy to meet, particularly in the industry where supply chains often overlap.

As a result, there’s been an ongoing debate about whether welding equipment needs to be manufactured at all.

This debate is now coming to a head.

As companies seek to reduce their manufacturing costs, welding companies are looking for alternatives to high-cost machinery.

There are many products available for welding that are less expensive than traditional welding equipment.

For example, welding machines may use a combination of weldable, flexible, and solid steel tubing.

A weldable tubing is a solid piece of metal that can be welded to a weldable plate or other structural support without breaking.

Flexible steel tubing is used to attach to a steel rod to allow it to be weldable at various speeds and temperatures.

Solid steel is usually made from steel that has been treated with an electric field to allow for high tensile strength.

Solid welders have the advantage of being inexpensive and flexible.

But welding machines must meet all of the following criteria in order to be considered as a welding source.

Welders must meet the following benchmark: • their total cost per hour must not exceed $10,000; • they must be assembled in the U.S. or in a U.K. factory; and, • the welding equipment must be used for welding at a minimum of 10,000 hours per year.

In order to meet these benchmarks, many companies must use welders equipment for welding jobs that are not being performed by welding companies.

Some companies, like the welding manufacturer CNC, have already started using welders-branded welding equipment for its customers, and others may soon start using weld-ready welding equipment, such in the welding-machine maker CNC-USA, the welding supplier ULTRA, or another company that has a direct connection with welding.

For companies that have a strong relationship with the weld-tool manufacturer or welding supplier that provides their welding equipment or products, they will also be able to sell welders welding tools directly to the weld shops and customers.

This will be especially important for the growing number of welder suppliers who rely on their welding services to meet a growing number, and to do so with the knowledge that their welders work are made in the safest and most efficient way.


Will there be a surge in low-quality welding equipment?

If welding companies can’t meet the requirements of the benchmark above, they may have to go out of business.

There is a lot of uncertainty about what is going to happen to the